Monday, January 31, 2011

Subaru VIVIO, 1992

Subaru VIVIO, 1992



The Subaru Vivio was a keicar that was introduced in March 1992, and manufactured by Subaru.

The name "Vivio" is a reference to the numbers 660 written in Latin numerals, and also inspired by the word vivid. The Vivio replaced the Subaru Rex. It was available in 3 and 5-door versions. The "Vivio Bistro" was a variation with a retro theme, with Mini-esque front and rear fascias, matching upholstery and modifications to the dashboard. The Bistro series was popular and Japan would see a string of modern retro-styled cars.

The Vivio with a variety of supercharged 4-cylinder engines.

Subaru Alcyone SVX, 1991

Subaru Alcyone SVX, 1991



The Alcyone SVX, also known in the United States simply as the SVX was a mid-sized sports-touring coupe sold by Subaru from 1991 to 1997.

History and sales
Subaru introduced the SVX in the United States in July of 1991, following up the U.S. debut with a Japanese market introduction in September of that year. The model was designed and marketed as the replacement for their aging Alcyone XT and Alcyone XT6 coupes. US sales were good and topped 3,859 units in 1993, although it is reported that Subaru intended to sell 10,000 SVXs each year. Sales dropped significantly for the next few years before falling to just 640 units in 1997, at which point Subaru discontinued the vehicle.

Overall sales of the SVX were 14,257 in the United States and a total of approximately 25,000 worldwide. 2,478 SVXs were sold in Europe (with 854 headed directly to Germany). Roughly 7,000 of all SVXs sold were right-hand drive models.

Body
In contrast to the boxy XT, the SVX had curvy, almost futuristic lines designed by Giorgetto Giugiaro of ItalDesign and an unusual all-glass canopy with 2-piece side windows. The windows are split about 2/3 of the way from the bottom, with the division being parallel to the upper curve of the door frame. These half-windows are generally seen on vehicles with "gull-wing" or "scissor" doors such as the Lamborghini Countach and the De Lorean DMC-12.

Drivetrain
Unlike the previous model, which had been available with either a turbocharged 4-cylinder (as XT) or a naturally aspirated 6-cylinder (as XT6), the SVX debuted with and remained available with only one engine, the EG33 model 3.3 litre flat-six. The engine was an indirect development of the ER27 model, 2.7 litre unit that had powered the Alcyone XT6, although the new 3.3 litre variant was equipped with dual overhead camshafts and 4 valves per cylinder, and had an increased compression ratio of 10.0:1, bringing power up to 230 hp (172 kW) at 5,400 rpm and 228 ft·lbf (309 Nm) of torque at 4,400 rpm.

Unlike Subaru's newer models, which are all sold exclusively with all-wheel drive, the SVX was available in both all-wheel and front-wheel drive.

Though it was considered to be a very powerful vehicle at its debut, the SVX was heavy, weighing in at about 3600 pounds (1600 kg), and was only available with a 4-speed automatic transmission, both of which adversely affected performance.

Volvo PCC Concept, 2000

Volvo PCC Concept, 2000

 
 

Volvo PCC Concept, 2000

Sunday, January 30, 2011

Aston Martin DB Mark III, 1957

Aston Martin DB Mark III, 1957


Aston Martin DB Mark III was launched at the Geneva Show in March 1957 and was available only for export until it was shown at the London Motor Show in October that same year. Aston Martin DB Mark III was the final development of the cars based on Claude Hill's chassis and the Lagonda six-cylinder twin overhead camshaft engine. It remained in production for circa nine months after the Aston Martin DB4 was introduced. Some 310 cars were exported to the USA.

Tadek Marek had finely re-designed the 3-litre engine. The standard DBA version of this engine had a stiffer crankshaft, a new block, oil pump and timing chain, new exhaust and induction manifolds, the ports were based on the Aston Martin DB3S engine, larger valves, high lift camshafts (after the first 150). With the same capacity (2,922cc) twin SU carburettors and compression ratio (8:16:1) as the VB6J engine, the improved breathing provided an output claimed to be 162 bhp at 5,500rpm.

The main change in the appearance of the car was the adoption of the elegant shape of the radiator opening from that of the DB3S and the consequent compound curves of the front of the bonnet, which can be traced on all subsequent models, including the V8. Inside, the main difference was a completely different facia and instrument panel (which remained in use until the Aston Martin DB6 Mark II was dropped in 1970). In 1959, for the first time, automatic transmission (Borg Warner) was offered (as an extra) for a production Aston Martin; it was installed only in four drophead coupes and one saloon.

Technical Specifications
    * Engine: dohc I-6, 2922 cc, 162 bhp @ 5500 rpm
    * Transmission: 4-speed manual
    * Length: 14' 3.5" (435.5cm)
    * Width 5'5" (165cm)
    * Height 4' 6.25" (138cm)
    * Wheelbase 8' 3" (251.5cm)
    * Weight: 1,270 kg (2,800 lb)
    * 0-60mph: 8.2 secs

Bentley Arnage Red Label, 2000

Bentley Arnage Red Label, 2000

 


Launched in late 1999 was the Arnage Red Label. Volkswagen, who had purchased the Bentley name and Crewe factory was loathe to continue purchasing BMW's engines, and it turned out that Bentley engineers and customers felt the same way. The BMW-powered Arnage, while objectively more modern than the Turbo RT it replaced, was more than a second slower to 60 mph than that car, and lacked the massive torque that Bentley customers had grown accustomed to.

Vickers had outsourced to Cosworth the production of the old 6.75 L Rolls-Royce engine for use in the continued Continental and Azure models, so reverting to the old standby engine was a natural choice for the company. In fact, Volkswagen purchased Cosworth as well, so all the pieces fell into place to eliminate the BMW engine.

The Red Label model reverted to the old V8, which boasted torque of 835 N·m with a single Garret T4 turbocharger. This was the greatest amount of torque for a four-door car at the time. Also returning was the General Motors-sourced 4-speed 4L80-E automatic.

A long-wheelbase version of the Red Label was launched at the Detroit Auto Show in 2001, and the Green Label ended production. The Red Label models were replaced in 2002.

Bentley Brooklands, 1992

Bentley Brooklands, 1992




The Bentley Brooklands was a full-size luxury sedan introduced for 1992 as the marque's new flagship after the Bentley Mulsanne and Bentley Eight were discontinued. The Brooklands was replaced by the Bentley Arnage in 1998 as the Bentley flagship model.

The Brooklands continued Bentley's relatively angular design scheme which was used on both, Rolls-Royce as well as Bentley vehicles, throughout the 1980s and early 1990s. The exterior design featured the classic Bentley waterfall grille as well as dual headlights with wrap-around parking lights. As in many Bentley and Rolls-Royce vehicles the Brooklands also featured the trademark descending trunklid and chrome B-pillars.

The interior remained relatively unchanged from previous Bentley models with a more curvaceous design elements surrounding the leather wrapped center console. The steering wheel and interior door panels remained unchanged. The interior continued to be surrounded by ample woodgrain which featured engraved, lighter-colored outlines on the door panels.

Technical specifications
The Bentley Brooklands was driven by a 6.7 L V8 with a 4-speed automatic transmission. The vehicle was rear wheel drive and featured independent front and rear suspension. While not as large as some other Ultra-luxury sedans, the Brooklands remained quite large with an overall length of 211.4" and 214.5" wheelbase (207.4" and 120.5" in SWB trim).
 

Saturday, January 29, 2011

Lamborghini Miura Roadster, 1968

Lamborghini Miura Roadster, 1968

 

The Lamborghini Miura is a sports car built in Italy by Lamborghini between 1966 and 1973. A mid-engined layout had been used successfully in competition, including by the Ford GT40 and Ferrari 250 LM at Le Mans. De Tomaso had produced a road car with this layout, the Vallelunga, but otherwise cars designed for the road were almost uniformly front-engined, rear drive vehicles. The Miura was a trendsetter, the one that made the mid-engined layout de rigueur among two-seater high performance supercars. It is named after the Spanish ranch Miura, whose bulls have a proverbial attack instinct.

Styling
Inspired by the Ford GT40, the Miura astonished showgoers at the 1965 Turin Motor Show where only the chassis was shown, with multiple orders being placed despite the lack of an actual body. Later, Marcello Gandini from Bertone, who would later go on to design almost all of Lamborghini's cars, was chosen to design the body. Both body and chassis were launched five months later at the 1966 Geneva Motor Show. It was a sensation, with its flamboyant bodywork and unusual engine and clam-shell opening hoods on both the front and rear of the car. There was a small trunk located in the very rear of the tail behind the engine.

Miura models
P400
Early Miuras, known internally as P400s, were powered by a 3.9 L version of the famous Lamborghini V12 engine mounted transversely and producing 350 hp (260 kW). 275 P400s were produced between 1966 and 1969, a success for Lamborghini despite its then-steep $20,000 USD price (approx. $114,000 in today's terms). The original Miura engines had the gearbox in the sump of the engine, and the gearbox shared the engine oil for lubrication. This necessitated frequent and consistent oil changes.

P400S
The P400S Miura, also known as the Miura S, made its introduction at the Turin Motorshow in Novermber 1968, where the original chassis was introduced 3 years earlier. It was slightly revised from the P400 with its newly added power windows, bright chrome trim around external windows, new overhead inline console with new rocker switches, minor revision engine internals, notched trunk end panels(allowing for slightly more luggage space). Engine changes were good for an additional 20bhp. Other revisions were limited to creature comforts, such as glove box door, reversed position of cigarette lighter and windshield wiper switch and single release handles for front and rear body sections. 338 P400S Miuras were produced between Dec 1968 and March 1971....

P400SV
The last and most famous Miura, the P400SV or Miura SV featured different cam timing, bigger valves and altered carbs, which increased fuel consumption so much that the factory offered a larger 110 litre fuel tank as an option. These gave the engine an additional 15 bhp, to 385. The engine also had a split sump, in that the gearbox now had its lubrication system separate from the engine, which allowed the use of the appropriate types of oil for the gearbox and the engine. The SV can be distinguished from its predecessors from its lack of "eyebrows" over the headlights and wider fenders to accommodate the new 9-inch wheels and Pirelli Cinturato tires. 150 SVs were produced, including one that was owned by Frank Sinatra.

P400 Jota
This one-off Miura (#747) was the development of Lamborghini Development Driver Bob Wallace in 1972, and only one was built initially as a powerful test mule for future Miuras. Lamborghini were forced to sell this car off due to financial problems in the late seventies. In 1980, upon delivery, the driver and a passenger totalled this particular model and survived without any injuries. Lamborghini has since built a replica of this car.

P400 SVJ
Once customers heard about the Jota, they requested their own "Jota" Miura called the SVJ, and so only 5 were built, all of which still exist.

One of the most high profile model was the Metallic Red Burgundy model (#4934), former property to that of the one of the company's best customer, HIH the Shah of Iran Mohammad Reza Pahlavi, he stored this car under armed guard with another SV in Royal Palace in Tehran.

Later, as he fled the country during the Iranian Islamic Revolution, the car with many others were seized by the Iranian government and was later sold into Dubai in 1995. In 1997 this car was sold via a Brooks auction to Nicholas Cage, at US$490,000, becoming the marque's highest ever price sold in an auction. Cage has since sold the car in 2002.

Roadster
Another one-off, the Miura Roadster (actually more of a targa-model, but without any removable roof) was built as a publicity stunt. After having been exhibited at several auto salons the car was sold to a group of companies in the metal business who turned it into a display-vehicle showcasing the possibilities of using their various metal alloys in cars. The car still exists today and has been frequently replicated.

P400 SVJ Spider
This version of the Miura was actually displayed in 1981 at the Geneva Motor Show by Lamborghini, shortly after the new CEO Patrick Mimran took over the factory. The car was actually the yellow Miura S presented at the 1971 Geneva Motor Show, reconstructed in 1980 in Spider by the Swiss Lamborghini Importer, Lambomotor AG. The Miura SVJ Spider was displayed on the Lamborghini stand with the other 1981 new models (Jalpa and LM002), equipped with wide wheels and a rear wing, in the context of the marque's revival, it was considered as a prototype for a possible limited series of Miura Spider.

Details
Early Miuras were notorious for being a fire hazard. The problem was caused by Lamborghini's decision to use Weber 40 IDL 3C1 carburetors which were designed exclusively for racing applications and weren't suitable for road use. The problem occurred when the car sat idling (e.g. at a stoplight), the area above the throttles filled with fuel which often ignited when the car accelerated away from the stop. One of Lamborghini's engineers devised a modification for the carburetors which created a fuel-return. Ferrari, who used these same carburetors in one of their cars, and suffered the same problems, were able to use Lamborghini's modification to solve it.

Some other interesting details: the position of the fuel tank is at the front causing the vehicle to have less weight at the front as the fuel tank gets lighter (closer to empty), thus making the car more difficult to handle at 150+ MPH. Another detail is that the doors resemble a bull's horns when it is opened wide (Lamborghini's logo itself depicts a raging bull).

In 2004, Sports Car International named this car number four on both the list of Top Sports Cars of the 1960s and Top Sports Cars of the 1970s. The car was ranked number four on the list of the Top Sports Car of All Time.

Specifications
Engine
    * Configuration: 60 degree V12, DOHC
    * Engine displacement: 3929cc
    * 350 bhp (261 kW) at 7000 rpm (Base)
    * 370 bhp (276 kW) at 7700 rpm (S)
    * 385 bhp (287 kW) at 7850 rpm (SV)

Performance
    * Top speed: 288 km/h (179 mph)
    * 0-100 km/h: 5.5 second
    * Quarter Mile: ~14 second

Lamborghini Islero, 1968

Lamborghini Islero, 1968


 

Lamborghini Islero was produced by Lamborghini between 1968-1970 and featuring the Lamborghini V12 engine. It was the replacement for the 400GT. The car debuted at the 1968 Geneva Auto Show.

The Islero (pronounced "eez-LEHR-oh") was named after a bull that killed famed matador Manuel Rodriguez "Manolete" on August 28, 1947.

Since Carrozzeria Touring, the company that designed Lamborghini's chasis, was bankrupt, Carrozzeria Marazzi was the next logical choice as it was funded by Mario Marazzi, an old employee of Touring. The design was essentially a rebody of the 400GT, but the track was altered to allow for wider tires and while the Islero's body suffered from a lack of proper fit between the panels, its good outward visibility, roomier interior, and much improved soundproofing made it an improvement over previous models. It had a 325 hp, 4L V12 engine, 5 speed transmission, fully independent suspension, and disc brakes. Its top speed was rated at 155 mph. Only 125 Isleros were built.

An updated Islero, dubbed the Islero S was released in 1969. The engine in this model was tuned to 350 hp but the torque remained the same. There were quite a few styling changes including brightwork blind slots on the front fenders, an enlarged hood scoop (which supplied air to the interior of the car, not the engine), slightly flaired wheel arches, tinted windows, round side marker lights (instead of tear drops on the original), and a fixed section in the door windows. Various other changes included larger brake discs, revised rear suspension and revamped dashboard and interior. The top speed of the S improved to 161 mph or 260 km/h. Only 100 examples of the Islero S were built, bringing the production total of the Islero nameplate to 225 cars. Ferruccio Lamborghini himself had an Islero as his daily drive car during that era.

Friday, January 28, 2011

Lexus GX470, 2003

Lexus GX470, 2003

 



The Lexus GX 470 is a mid-size SUV built in Tahara plant in Japan and sold only on the North American markets by Toyota's luxury division Lexus. It was introduced in November 2002 as a 2003 model as Lexus's true answer to the BMW X5, Acura MDX, Land Rover LR3 and Porsche Cayenne. It is the US market version of the Toyota Land Cruiser Prado. It was released at the same time as the Infiniti FX, its competitor.

The 2005 GX 470s are powered by a 4.7 L, 32-valve, four-cam V8 engine with 270 hp (201 kW) at 5,400 rpm and 330 ft·lbf (447 N·m) of torque at 3,400 rpm. This is also the largest engine that has ever been put into a Lexus.
The GX 470 has a welded steel body, an electronically controlled 5-speed automatic transmission, a 4 wheel drive system, and its interior offers a place for up to eight passengers.

The vehicle is a competent contender for serious off-roading while civilized enough for everyday driving. The MSRP is averaged at about US $50,000. It has won various awards including 4-Wheeler of the Year from 4X4 Magazine.
In the Lexus lineup, it is situated between the premium LX 470 and the entry-level luxury RX 350.

Lexus SC430, 2002

Lexus SC430, 2002




The Lexus SC series is a personal luxury coupé manufactured by the Toyota Motor Corporation under the Lexus brand and sold in Japan as the Toyota Soarer. The first generation, available as the SC 300 or SC 400 was in production from 1991 until July 7, 2000. A second-generation model, the SC 430, went into production in 2001.

Lexus showcased its new sports convertible, the SC 430, at the Paris Motorshow in 2000, and the car entered production the following year. Power was provided by a 4.3 L 3UZ-FE V8 engine mated to a five-speed automatic transmission. This produces 0-60 runs around 6 seconds using the same engine found in the Lexus LS.

Lexus designers from Europe and Japan worked together to create the convertible's sleek, streamlined design. The car features a retractable aluminium hardtop, all-leather interior, and 18 in alloy wheels. It can seat four and has a base price of US$63,825.
Competitors include the Mercedes-Benz SL-Class, Cadillac XLR, and Jaguar XK, and BMW 6-series.

Lexus LS430, 2002

Lexus LS430, 2002



The Lexus LS (sold as the Toyota Celsior in Japan, Australia, and some other countries.) is a V8-powered, rear wheel drive luxury car that serves as the flagship of Toyota's luxury Lexus division.

First generation (UF10)

UF10 I (1989)
The UF10 I LS 400 was produced from 1989 to 1994. The model introduced the Lexus nameplate to the US, and soon after won critical acclaim, becoming Wheels magazine's Car of the Year and earning a place on Car and Driver magazine's Ten Best list for 1990. The LS 400 was initially intended to be introduced as a standalone model for Lexus, but ultimately was sold alongside the ES 250, an entry-level luxury car that was based on the Toyota Camry.

UF10 II (1993)
For the 1993 model year, the LS 400 (now designated as the UF10 II) was introduced with larger brake rotors, standard passenger's side front airbags, larger wheels and tires, and numerous other upgrades.

Second generation (UF20)

UF20 III (1995)

Introduced in 1995, the UF20 III LS 400 was an evolutionary redesign of the LS and featured a new body that eliminated 300 lb from the previous car. The wheelbase was increased by 1.4 in, resulting in more interior and trunk space, yet the overall length of the car remained at 196.7 in. The durability of the brake system was improved as well.

The most noticeable cosmetic upgrades included a new front fascia with an increased gap between the headlights and grille, new headlights and taillights. The interior received a minor redesign with a more modern dashboard layout and the center console receiving a slight facelift.

UF20 IV (1998)
Lexus LS430

For the 1998 model year, the UF20 IV LS 400 was introduced. New interior amenities included retractable rear headrests, wood accents on the leather-bound steering wheel and gear selector, and a navigation system with a concealed antenna. A new "jam protection system" for the vehicle's windows was designed to reduce the risk of possible injury by preventing the windows from closing if an object came in between the window and the door frame. Door window controls were also added to the vehicle remote control.

Exterior updates included new five spoke wheels as well as redesigned rear view mirrors that reduced the amount of wind noise. The automatic headlights were now equipped with a delay feature that allowed the headlights to remain on while the occupants exited the vehicle.

The revised LS 400 featured Toyota's new 290 hp VVT-i UZ engine mated to a five-speed automatic transmission. The drivetrain improvements not only enabled the 3,890 lb sedan to accelerate from 0-60 mph in 6.5 seconds but also improved the vehicle's fuel economy.

Third generation (UF30)
UF30 I (2001)
For 2001, the UF30 I LS 430 was introduced. While previous LS redesigns were evolutionary, the 2001 update was a more thorough update of the model's exterior and interior. The UF30 had a completely redesigned suspension and a brand new 4.3 L engine generating 290 hp (216 kW) and 320 ft•lbf (434 N•m) of torque. Lexus claims the LS430 can run 0-60mph in 5.9 seconds. A three-inch wheelbase stretch resulted in more interior volume than the competing Mercedes-Benz S-Class and allowed the engine to be positioned farther rearward for better balance. Features such as Dynamic Laser Cruise Control, a DVD-based navigation system and heated & cooled seats became available. These and other features, such as sonar assisted parking, power rear seats with massage and a rear cooler were bundled in the 'Ultra Luxury Package.'

In the interior the most notable design changes included additional woodgrain trim on the dashboard and doors as well as the addition of an LCD screen on the center console. The exterior of the vehicle was completely new with the vehicle's dimensions increasing in terms of length and height.

UF30 II (2004)
The UF30 II was introduced in 2004. Lexus freshened the front & rear fascias and added as standard equipment previously optional features, such as a one-touch power moonroof, power rear sunshade, and lighted rear-seat vanity mirrors. Some features previously included in the Custom and Ultra Luxury packages became available separately. The transmission got an added sixth gear, and keyless 'smart access' and Bluetooth technology became optional, while a pre-collision system, similar to Mercedes-Benz's Pre-Safe, which used millimeter-wavelength radar to predict crashes and allow distance-aware cruise control, was added as an option. Other updates included different wheels, projector headlamps, and LED taillights.

The 2001 to 2006 LS 430 was the most reliable luxury sedan in the J.D. Power and Associates Initial Quality survey, and the early models of this series were the most reliable cars in the survey. In later studies of defects after 3 years of ownership, the LS 430 is also at the top of the pack. The third season of the popular BBC television program, Spooks, featured a number of Lexus LS vehicles as part of the brand's introduction in the British market.

Thursday, January 27, 2011

Rinspeed X-Trem Concept, 1999

Rinspeed X-Trem Concept, 1999

 
 
 
In the words of Frank M. Rinderknecht founder and owner of Rinspeed Inc.: "Pick-up vehicles are - especially in the U.S. - very popular. However, many times I remarked that these kind of cars were pulling a trailer loaded with objects for sporting activities or for the job. Yet, the pick-up bed stayed empty for most of the times. The actual vehicle was not being used for what it was designed for". In the analysis of this fact it became quickly obvious that the obstacles of the height of the bed and the tail-gate were not easy to overcome. How - for example - does one load a motorcycle quickly and safely on the bed?

"X-Tra-Lift"
Equipped with this unique loading device, any new or used pick-up truck can take all kinds of goods or platforms. These goods are swiftly loaded by an electrically or hydraulically powered swivel crane - which at the same time can be designed as a anti-roll-bar - from the ground to the bed and of course unloaded the same way. The obstacles of the weight, loading height and tail-gate are easily overcome.
The universal conception of this lifting system allows an extensive and comprehensive use as a multiplex system. The car transforms itself easily from a sport to a leisure as well as to commercial vehicle and back.

As innovative the "X-Tra-Lift" presents itself, as futuristic and avant-garde the latest creation of Rinspeed Design, the X-Trem, is concepted. One of the most remarkable features is surely the fact that the Rinspeed X-Trem complies with valid European Union legislation and is a fully-fledged road-going design. "We wanted to build an exclusive car, but one that could be taken out on the roads as well as acting as a pilot project at exhibitions." This ambitious target has certainly been achieved.

One of the world's smallest, yet functional hovercraft is loaded as a special "presentation cargo" on the Rinspeed X-Trem. This air propeller driven and hovering fun vehicle can be piloted easily over all kinds of surfaces: water, land, sand and snow.

The technical features
Under the wide engine cover which electrically tilts forward, power is supplied in plenty by a 5.5-litre-aluminum-block V8 engine from Mercedes-Benz, it develops no less than 347 bhp. This engine, coupled to an automatic transmission, whisks the four-wheel-drive two seater - the base consists of an extended chassis from the Mercedes-Benz M-class - from a standstill to 100 km/h in only 6.9 seconds, with a top speed of 235 km/h attainable when conditions permit. The torque is herculean: at 3'500 rpm already the maximum of 520 Nm is developed.

The technical base of the M-class by Mercedes-Benz inspired the typical "four-eyes-face" of the DaimlerChrysler Group - known from the model E- and CLK. The pronounced engine hood links unmistakably to the typical design lines of the American offshoot Chrysler.

The composite body gives the X-Trem an exceptionally rigid structure and a gross weight of only 1'860 kilograms, with the result that its power-to-weight ratio would be the envy of many a driver of exclusive Italian sports cars.
The two windshields are electrically adjustable and move in and out of the powered engine hood in order to protect the passengers from unpleasant wind drafts.
All wheels are hung independently and the 18-inch wheels and tires of sizes (285/50 at the front and rear) guarantee a perfect handling.

The interior
The interior presents itself also in a new way. At the first glance the centrally located LCD-screen with touch-screen functions is attracting attention. All functions of the car, the navigation-system, the radio, the access to email and the internet via a GSM- or satellite-connection are controlled at a finger-tip. All menus are easily and discretionary called up.

The materials used for the interior connect to the leisure time use of the Rinspeed X-Trem: deep black Neoprene, steel colored and checkered Carbon-tissue. As an unusual element the seat cushions are easily reversible. By this feature not only the look of the interior can be swiftly changed, but the tissues are adapted to the use of the vehicle.
The drivers are not neglected: An exclusive stainless steel humidor with a integrated humidifier invites to a cigar break.

The development work
For the realization of this project Frank M. Rinderknecht worked with the most modern technologies and the best specialists of the Swiss car industry. Despite that Switzerland does not have an international reputation in the automotive industry, every year an astonishing numbers of concept cars and prototypes are made in this country.

For the first time, Rinspeed called upon the services of the Swiss engineering company Esoro as a general contractor for the design, the engineering and the construction of the X-Trem. Esoro materialized this demanding task in cooperation with Richard Gresens - a the former designer of VW and partner in William M. Schmidt Associates - and the prototype and suspension specialist Schwaller Movement Engineering who also manufactures components for Sauber Formula One. In just six and a half months the X-Trem with its new lifting system and a hovercraft body have been fabricated by the competent and efficient engineering team.

Rinspeed E-Go Rocket Concept, 1998

Rinspeed E-Go Rocket Concept, 1998


 
 

As many times before the Rinspeed Design company, led by Frank M. Rinderknecht, has come up with something very special: the small Swiss automobile specialist has created a vehicle that blends traditional beauty and forward-looking technology in a most impressive way - the Rinspeed E-Go Rocket. Inspired by one of the world famous record setting cars on the salt flats and developed in only six months time, his company's contribution to the Geneva "Salon de l'Auto", is an eye-catcher that could well generate active discussion among the visitors.

The high-performance tires come from Continental, which are mounted on specially developed wheels supplied by Antera. Running-gear technology comes from the Eibach company, which not only works for the leading international motor-sport teams but also for the McLaren Formula 1 Racing Team. For the Rinspeed E-Go Rocket, Eibach is exhibiting in Geneva competition shock absorbers with four-position adjustment which it has itself developed. The Remus company has produced an optimized-flow exhaust system for the Rinspeed E-Go Rocket. The Swiss company Rieter Automotive Systems supplied the finest of all carpets for the interior, the acoustic foams and the heat-shields. The vehicle was built by TLC Carossiers Inc. in Florida and transported by the air-freight specialist Lufthansa Cargo to Europe. Burg Design created stunning interior and exterior elements by the use of a special high-tech process. Audio entertainment and flawless route planning are taken care of by a hi-fi radio and CD system and the first-class navigation equipment from Philips Car Systems. The custom luggage bag was made by the Swiss travel goods company De'Shama.

Frank M. Rinderknecht utilized the very latest techniques in his development work. The vehicle was drafted out by computerized (CAD/CAM) methods. Changes are scarcely ever needed when the full-scale model is made. As Rinderknecht explains: "Using CAD/CAM, we obtain unsurpassed processing quality and also an unbeatable development speed."

Under the wide engine cover, the supercharged aluminum-block V8 engine has a rated output of 410 horsepower. This compact and centrally located power-pack accelerates the single-seater to 100 km/h from a standstill in just 4.8 seconds (and on to a top speed of 260 km/h). The Rinspeed E-Go Rocket's composite body gives it outstanding strength and rigidity, but at the same time keeps its weight down to 1'050 kilograms. The inclination of the windshield is adjustable to the speed driven. The interior presents itself also in a new way: The seat is covered in washed blue denim. The 18-inch wheels are shod with 235/50 and 255/45 tires.

The Rinspeed E-Go Rocket, Frank M. Rinderknecht's latest automobile creation as its precessor the Rinspeed Mono Ego, is equally notable for the fact that it is a fully road-going car that complies with valid European Union legislation. "We wanted to build an exclusive car, but one that could be taken out on the roads as well as acting as a pilot project at exhibitions." With these words, Rinderknecht emphasizes the ambitious objectives he put into effect when designing and building the Rinspeed E-Go Rocket. The price of Rinspeed's latest avant-garde creation, to be built only on order, has not yet been determined.
Related Posts Plugin for WordPress, Blogger...